Waterside MC 450S 10ltr High Flow Meter Control Water Softener

Once installed and set up our water softener automatically performs a regeneration and supplies the entire property with softened water. It has the added benefit of being able to use either Block, Tablet or Granular water softener salt however we do recommend the use of tablet salt with this unit.
WHY THIS IS THE ONE TO BUY?
The Waterside is designed with efficiency in mind.  At the heart of the water softener is the intelligent meter system that not only monitors your water consumption, but learns from it on a daily basis.
As well as being more accurate than most machines when deciding whether or not to do a regeneration, it also uses a proportional brining system to regenerate: Where most Softeners only have the capacity to perform a full regeneration, the Waterside will make an allowance for any unused capacity and perform a shorter regeneration using less salt and less water.   
GUARANTEE
All EMWC Water Softeners have a 5-year guarantee -at no extra cost! Because of its proven reliability, your EMWC water softener will have a five-year parts and one year labour guarantee. This, alongside our proven track record for producing highly reliable equipment, has established us as one of the UK's most popular water softener companies.
MADE IN ENGLAND
The water softener is manufactured in the UK and is therefore designed specifically for the UK market and for the UK domestic water system. It also means that we, unlike other companies, "wet test” the softeners before they leave the factory, so you can rest assured that the softener firstly works but more importantly it doesn't leak.

INSTALLATION
Installing your Water softener - plumber or DIY? Every water softener comes complete with , fitting instructions and an option of an installation kit allowing for installation by a plumber or DIY enthusiast.

TECHNICAL
Valve: Meter
Connections
Inlet/Outlet 3/4" Bsp male parallel
Overflow 1/2" Hose connector
Drain 1/2" O.D tubing
Operating Parameters
Max operating Pressure 5 bar (72.5 p.s.i )
Min Operating Pressure 1.7 bar (25 p.s.i )
Max water temperature 49 degree C
Min water temperature Protect from freezing.

Volume & Weight
Softener Resin volume 1x 10 litres
Salt Storage capacity 15Kg tablet salt

Dimensions
Depth 480mm -  19 inch
Height 532mm - 21 inch
Width 270mm -  11 inchOperating Data
1667Ltr per cycle Capacity per regen at 300ppm hardness
1.4KG Max Salt used per Full regeneration
50 litres / min peak flow at 2 bar pressure drop 30 litres / min Rated service flow at 1 bar pressure drop
80 litres Max Water used per Full Regeneration

Installation Kits
Pressurised Systems (Mega Flo) = 22mm Kit
Combination Boilers = Combi Kit
Standard Fittings (most Homes = 15 mm Kit select an alternative Installation Kit (if required) from the Checkout
To choose your fitting kit for this softener please click on add to order below for the 3 fitting kit options.