HPN 1A This pump is perfect for eliminating accidental spilling of solutions during liquid transfer. This Polyester Drum Pump w/ 8 ft. EPDM Discharge Hose is a double action piston type which can handle a wide range of solutions. The pump body, valves, valve seats, and piston are all made of chemically resistant, performance engineered plastics, specially compounded to give the pump strength and rigidity. All internal metal parts in contact with the liquid are made of 316 stainless steel. Also features a two position pump handle, which can be placed above or below the body of the pump, for easier operation on a truck or high tank. Call for Same Day Shipping for orders placed before 12:30 PM EST Features: -For point-of-use dispensing/filtering of water and chemicals* used for farm, marine, industrial, as well as other stringent applications -Quality engineered thermoplastic construction -Two Position Pump Handle: Handle can be mounted above pump or below, making it much easier to operate on a truck or high tank -Controlled Discharge Rate: This pump discharges approximately one (1) quart on every complete forward and backward cycle -Tamper Proof Handle: Can be padlocked to prevent unauthorized use -Self Lubricated Teflon (TFE) Piston Ring: Operates wet or dry for long life Specifications: -Pump Body: Polyester, glass reinforced pump body -Discharge Hose: 8 ft. EPDM discharge hose w/ polyester elbow and nozzle -Suction Tube: 2 pc. 1'' Polyester, 34'' long w/ polyester and TFE tape -Suction Lift: Tested for 15 ft. minimum -Discharge Head: Up to 25 ft. -Viscosities up to 2,000 SSU Notice: -*Refer to a Chemical Resistance Chart for compatibility of materials. Always wear protective clothing such as gloves, apron, and goggles. -**When pumping flammable or combustible liquids from one container to another, both containers must be effectively bonded and grounded to prevent discharge of sparks of static electricity which could cause explosion and bodily harm. Be smart.
No comments:
Post a Comment